|
|
|
|
|
|
|
|
|
O ring FKM
|
| This kind of FKM is made of Chinese high quality fluorine gum polymer, mixed by imported vulcanizer, acid adsorbent, reinforcing filler and processing aid. O ring FKM shows high tensile strength, small compression set and good thermal tear resistance. It is the ideal fluorine rubber to produce seal products such as O-rings, gaskets with same properties as imported FKM.
|
|
|
|
|
|
|
|
Oil seal FKM
|
| This kind of FKM is made of Chinese high quality fluorine gum polymer, mixed by imported vulcanizer, acid adsorbent, reinforcing filler and processing aid. oil seal FKM shows high tensile strength, bigger elongation at break and good thermal tear resistance. It is the ideal fluorine rubber to produce engine oil seals, valve oil seals and bellows which have complicated out surfaces. It can replace imported fluorine rubber with same performance.
|
|
|
|
|
|
|
|
Cord and Hose FKM
|
| This kind of FKM is made of Chinese high quality fluorine gum polymer, mixed by imported vulcanizer, acid adsorbent, reinforcing filler and processing aid. Cord and Hose FKM shows high tensile strength, small compression set and good thermal tear resistance. Extruded products made of this kind FKM show smooth surface, good dimension stability, small contract during vulcanization and keep section shape very well.
|
|
|
|
|
|
|
|
Valve FKM
|
| This kind of FKM is made of Chinese high quality fluorine gum polymer, mixed by imported vulcanizer, acid adsorbent, reinforcing filler and processing aid. Valve FKM shows high tensile strength, bigger elongation at break and good thermal tear resistance. It is suitable fluorine rubber to manufacture pipe lining and valve bush which has complicated sections. . It can replace imported fluorine rubber with same performance.
|
|
|
|
|
|
|
|
FKM made of imported gum polymer
|
| This kind of FKM is made of Chinese high quality fluorine gum polymer, mixed by imported vulcanizer, acid adsorbent, reinforcing filler and processing aid. DuPont, 3M, DAIKIN and AGC are our gum polymer suppliers.
|
|
|
|
|
|
|
|
Water Vapor Resistant FKM
|
| This kind of FKM is made of Chinese high quality fluorine gum polymer, mixed by imported vulcanizer, acid adsorbent, reinforcing filler and processing aid. It shows better performance in hot water vapor resistance, hot water resistance, acid or alkaline resistance and strong oxidizer resistance.
|
|
|
|
|
|
|
|
Insulation FKM
|
| This kind of FKM is made of Chinese high quality fluorine gum polymer, mixed by imported vulcanizer, acid adsorbent, reinforcing filler and processing aid. It shows excellent insulation properties, hot, oil and acid or alkaline resistance. The breakdown voltage tested is more than 3 KV/mm.
|
|
|
|
|
|
|
|
Highly Fluorinated FKM
|
| Elastomer is fluoroelastomer terpolymer with a minimum of 69% by weight fluorine content, shows small volume swell in chemical resistance test and low permeability comparing with ordinary fluorine rubber.
|
|
|
|
|
|
|
|
FFKM
|
| FFKM is suitable to apply in ether, amino compound, ketone, Oxidizer, strong acid or alkaline and fuel environment, it shows perfect resistance to all most chemicals. High temperature service can be 6000hrs at 235 ℃ or 1 month at 300 ℃ without any detected surface change. It can be applied to produce seals of semiconductor, chemical and pharmaceutical.
|
|
|
|
|
|
|
|
